KS1000 RW Trapezoidal
| Core Thickness (mm) |
40 |
50 |
60 |
70 |
80* |
100* |
120* |
| Weight kg/m² 0.5/0.4 steel |
9.9 |
10.3 |
10.7 |
11.0 |
11.5 |
12.3 |
13.1 |
| Weight kg/m² 0.7/0.4 steel |
11.8 |
12.2 |
12.6 |
12.9 |
13.4 |
14.2 |
15.0 |
| Weight kg/m² 0.7/0.5 alum.† |
5.6 |
6.0 |
6.4 |
6.7 |
7.2 |
8.0 |
8.8 |
*These panel thicknesses comply with Part L2 (England & Wales) and Section 6 (Scotland)
† Aluminium faced panels are not LPCB and FM certified.
Product Tolerance
| Cut to Length |
-0.05% |
+0.1% |
| Liner Sheet Length |
-0.1% |
+0.1% |
| Cover Width |
-0mm |
+3mm |
| Thickness |
-2mm |
+2mm |
| End Square |
-3mm |
+3mm |
Available Lengths
Standard lengths 1.8 to 12 metres. 12 to 21 metres can be supplied but may be subject to a transport surcharge. Panels less than 1.8m long which require a cut back can be provided, but will be charged at full 1.8m price, plus cutting cost.
Panel End Cut Back
All panels are normally produced with a minimum cut back of 10mm. Cut backs up to 175mm can also be manufactured. If flush ended panels (no cut back) are required they can be manufactured with one end flush and a 10mm cut back on the opposite end, based on panels exceeding 1.8m in length.
The recommended cut back for panel end lapping is 150mm. Panels less than 1.8m long which require a cut back can be provided, but will be charged at full 1.8m price, plus cutting cost.
|