KS1000 LP CR - Lo Pitched - Curved
| A - Core Thickness (mm) |
45 |
60 |
80* |
100* |
| B - Overall Dimension (mm) |
80 |
95 |
115 |
135 |
| Weight kg/m2 0.5/0.4 steel |
9.5 |
10.1 |
10.9 |
11.4 |
| Weight kg/m2 0.63/0.4 steel |
11.2 |
11.8 |
12.6 |
13.1 |
| Weight kg/m2 0.7/0.5 alum.† |
5.67 |
6.27 |
7.07 |
7.50 |
*These panel thicknesses comply with Part L2 (England & Wales) and Part J (Scotland)
† Aluminium faced panels are not LPCB andFM certified.
Product Tolerance
| Cut to Length |
-5mm |
+10mm |
| Liner Sheet Length |
-5mm |
+10mm |
| Cover Width |
-0mm |
+3mm |
| Thickness |
-2mm |
+2mm |
| End Square |
-3mm |
+3mm |
Available Lengths
Panel lengths 1.8 to 28 metres are supplied. Panels less than 1.8m long can be supplied but do not have a cut back as standard and are subject to extra charge. Panels less than 1.8m long which require a cut back can be provided, but will be charged at full 1.8m price, plus cutting costs.
Panel End Cut Back
Panels can be supplied with a cut back of 75mm or flush ends. Panels less than 1.8m long which require a cut back can be provided, but will be charged at full 1.8m price, plus cutting cost.
End Lap
It is recommended that panels are used in continuous lengths from ridge to eaves with no end laps. However, where an end lap must be used the flush end of the down slope panel has a factory fitted end lap stitching plate.
Cover Cap
The cover cap is made from 0.5mm thick steel coated to the same specification as the weather sheet of the panels. The caps are supplied in lengths up to 12 metres. Panels less than 1.8m long which require a cutback are subject to extra charge.
|